K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
![background image](/gmc/k_2500_truck_4wd/v8-6.5l_dsl_turbo_vin_s/Page-660001.png)
Drive Belt Tensioner: Testing and Inspection
INSPECTION PROCEDURE
NOTICE: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. Remove the drive belts.
2. Position a hex-head socket on the belt tensioner pulley bolt head.
3. Move the drive belt tensioner through it's full travel.
-
The movement should feel smooth.
-
There should be no binding.
-
The tensioner should return freely.
4. If any binding is observed, replace the tensioner.
5. Install the drive belt.