K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Engine Mount: Service and Repair
Engine Mount Replacement (Rear)
REMOVAL PROCEDURE
C-Models (Automatic Transmissions)
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable from the battery.
2. Inspect the engine mounts.
NOTICE: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley.
Due to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump
screen. This will result in a damaged oil pickup unit.
3. Support the rear of the engine to relieve the weight on the rear mounts.
4. Remove the bolts and washers from the rear engine mount.
5. Raise the rear of the engine only enough to permit removal of the engine mount.
6. Remove the engine mount.
C-Models (Manual Transmission)
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
