K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Timing Cover: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cables from the batteries.
2. Drain the cooling system.
3. Remove the upper fan shroud from the radiator.
4. Remove the drive belt from the pulleys.
5. Raise the vehicle.
6. Remove the lower fan shroud from the radiator.
7. Remove the A/C compressor from the mounting bracket and reposition to the side.
8. Remove the power steering pump from the mounting bracket.
9. Remove the left mounting bracket from the engine block.
10. Remove the generator from the mounting bracket.
11. Remove the vacuum pump from the mounting bracket.
12. Remove the right mounting bracket from the engine block.
13. Remove the water pump from the engine front cover.
