K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Transmission Speed Sensor: Service and Repair
NV3500 & NV4500 Manual Transmission
Vehicle Speed Sensor (NV3500)
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lift Points.
2. Disconnect the electrical connector from the vehicle speed sensor assembly.
3. Place a drain pan under the transmission in order to catch the oil.
4. Remove the following parts:
-
The bolt
-
The vehicle speed sensor
-
The O-ring seal
INSTALLATION PROCEDURE
1. Coat a new O-ring seal with a thin film of transmission oil. Use Synchromesh Transmission Fluid or the equivalent.
2. Install the following parts: