K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
7. Install the torque converter clutch solenoid bolts.
-
Tighten the bolts to 11 Nm (8 ft. lbs.).
8. Install the bolts securing the pressure switch to the control valve body.
-
Tighten the bolts to 11 Nm (8 ft. lbs.).
9. Connect the electrical connectors to the control valve body components.
10. Install the filter, gasket, and oil pan. Refer to AT Fluid/Filter Changing.
Control Valve Assembly Overhaul
CLEANING PROCEDURE
CAUTION: Some valves are under pressure. Cover the bores while removing the roll pins or personal injury could result.