K 2500 Truck 4WD V8-6.5L DSL Turbo VIN S (1998)
Speed Sensor: Service and Repair
New Venture 241, 243 and Borg-Warner 4401, 4470
Speed Sensor Replacement (Front Sped Sensor Replacement)
REMOVAL PROCEDURE
1. Remove the electrical connector from the speed sensor.
2. Remove the front speed sensor from the transfer case.
INSTALLATION PROCEDURE
1. Install the front speed sensor into the transfer case.
-
Tighten the front speed sensor to 31 Nm (23 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the electrical connector to the speed sensor.
Speed Sensor Replacement (Rear Speed Sensor Replacement)
REMOVAL PROCEDURE
1. Remove the two electrical connectors from the two rear speed sensors.