K 2500 Truck 4WD V8-8.1L VIN G (2001)
Speaker: Service and Repair
Speaker Replacement - Front (Windshield Pillar Speaker)
REMOVAL PROCEDURE
1. Remove the windshield garnish molding (2).
2. Disconnect the electrical connector (3) to the speaker.
3. Remove the speaker (1) by press till it is out of the molding.
INSTALLATION PROCEDURE
1. Press in the speaker (1) till it is fully seated.
2. Connect the electrical connector (3).
3. Install the windshield garnish molding (2).