K 2500 Truck 4WD V8-8.1L VIN G (2001)
7. Clean and prepare all of the bare metal surfaces.
IMPORTANT: Prior to refinishing, refer to the publication GM 4901 M-D-2000 GM Approved Refinish Materials for recommended products. Do
not combine paint Systems. Refer to paint manufacturer's recommendations.
8. Apply approved anti-corrosion primer.
9. Apply a full-bodied caulk to the entire hinge mounting surface in order to ensure a proper seal.
10. Align the hinge (1) and the backing plate (4) with the holes in the door (2).
NOTE: Refer to Fastener Notice in Service Precautions.
11. Align the hinge (1) and the backing plate (4) with the holes in the door (2) and install the bolts (3).
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
12. Apply the sealers.
13. Refinish the metal surfaces as necessary.
14. Install and align all of the related panels and the components.
