K 2500 Truck 4WD V8-8.1L VIN G (2001)
1. Press the retainers into place in order to install the weatherstrip to the mounting surface.
2. Close the door.
Side Door Opening Weatherstrip Replacement
Side Door Opening Weatherstrip Replacement
Removal Procedure
1. Open the door.
2. Pull the weatherstrip from the door pinchweld flange.
Installation Procedure
1. Install the door weatherstrip to the door pinchweld flange by completing the following steps:
1. Position the preformed corner of the weatherstrip in the upper rear corner of the door opening.
2. Starting at the preformed corner, push the weatherstrip onto the flange.
3. Continue pushing the weatherstrip onto the flange around the entire edge of the door opening.
2. Close the door.
Weatherstrip Replacement - Side Door Opening
REMOVAL PROCEDURE