K 2500 Truck 4WD V8-8.1L VIN G (2001)
Coolant Line/Hose: Service and Repair
Water Outlet Tube Replacement
Water Outlet Tube Replacement
Removal Procedure
1. Remove the upper intake manifold sight shield using the following procedure:
1.1.
Remove the retaining bolt in the front of the shield.
1.2.
Lift-up on the front of the shield.
1.3.
Lift the shield off the rear bracket.
2. Drain the engine coolant.
3. Remove the radiator inlet hose from the water outlet tube.
4. Remove the bolt and wiring harness bracket at the thermostat housing.
5. Disconnect the turbocharger coolant hose from the turbocharger bypass valve.