K 2500 Truck 4WD V8-8.1L VIN G (2001)
Fan Shroud: Service and Repair
Upper
Fan Shroud Replacement - Upper
Removal Procedure
1. If equipped with a 4.31- engine, perform the following:
^
Loosen the air cleaner outlet duct clamps at the following locations:
-
Throttle body
-
Mass Airflow/Intake Air Temperature (MAF/IAT) sensor
^
Remove the air cleaner outlet duct wingnut.
^
Remove the air cleaner outlet duct.
Pivot the resonator end of the duct upward until the hinge clip releases from the lip on the throttle body.
2. If equipped with a 4.8L, 5.3L, or 6.0L engine, perform the following:
^
Loosen the air cleaner outlet duct clamps at the following locations:
-
Throttle body
-
MAF/IAT sensor
^
Remove the radiator inlet hose clip from the outlet duct.
^
Remove the air cleaner outlet duct.