K 2500 Truck 4WD V8-8.1L VIN G (2001)
Intake Manifold: Service and Repair
Intake Manifold Removal
Intake Manifold Replacement
Removal Procedure
Important: The intake manifold, throttle body, fuel rail, and injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
1. Loosen the clamps at the throttle body and air cleaner.
2. Remove the air cleaner outlet duct.
3. Loosen the intake manifold sight shield bolt (3).
4. Remove the sight shield from the bracket (1).
5. Remove the sight shield bracket (1) and nuts.
6. Relieve the fuel system pressure.
7. Disconnect the fuel feed and return pipes.
