K 2500 Truck 4WD V8-8.1L VIN G (2001)
10. Install a NEW AIR pipe gasket, if equipped.
11. Install the AIR pipe, if equipped.
12. Connect the AIR pipe from the AIR pump pipe, if equipped.
13. Install the AIR pipe bolts to the exhaust manifold, if equipped.
^
Tighten the AIR pipe bolts to 25 Nm (18 ft. lbs.).
14. Install the AIR pipe nut to the fuel rail stud, if equipped.
^
Tighten the AIR pipe nut to 12 Nm (106 inch lbs.).
15. Install the wheelhouse panel.