K 2500 Truck 4WD V8-8.1L VIN G (2001)
Compressor Clutch Coil: Service and Repair
Compressor Clutch Coil Removal (HT6/HD6/HU6)
TOOLS REQUIRED
-
J 6083 External Snap Ring Pliers
-
J 33023-A Puller Pilot
-
J 41552 Compressor Pulley Puller
-
J 8433-1 Puller Bar
-
J 33025 Clutch Coil Puller Legs
-
J 8433-3 Forcing Screw
1. Remove the clutch plate and hub assembly.
2. Use the J 6083 in order to remove the following components:
-
The pulley rotor (1)
-
The bearing assembly retaining ring (2)
3. Install the J 33023-A to the front head.
4. Install the J 41552 down into the inner circle of slots (1) in the rotor.