K 2500 Truck 4WD V8-8.1L VIN G (2001)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb Replacement - Rear
REMOVAL PROCEDURE
1. Remove the rear fog lamp lens retaining screws (1).
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
2. Remove the bulb from the rear fog lamp assembly by twisting the bulb counterclockwise and pulling the bulb out.
INSTALLATION PROCEDURE
1. Install the bulb to the rear fog lamp assembly by inserting the bulb and twisting the bulb clockwise.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rear fog lamp lens (1) retaining screws (2).
Tighten
Tighten the rear fog lamp lens retaining screws (2) to 2 N.m (18 lb in).
3. Inspect the operation of the rear fog lamp.