K 2500 Truck 4WD V8-8.1L VIN G (2001)
84.
Place the remaining bolts into position as shown, paying particular attention to the bolt numbers and locations. Install all bolts finger tight. Then
tighten all thirty of the bolts to the appropriate specification.
Tighten
Tighten all bolts to 55 N.m (40 lb ft).
85.
Install the seal (2) into the oil pump hub with the J 43772.
86.
Install a new transmission suction filter, P/N 29537965.
87.
Install the transmission oil pan and gasket.