K 2500 Truck 4WD V8-8.1L VIN G (2001)
12. Install the transmission fluid pressure switch.
13. Install but do not tighten the control valve body bolts which retain the transmission fluid pressure switch to the control valve body.
Notice: Torque valve body bolts in a spiral pattern starting from the center. If the bolts are torqued at random, valve bores may be distorted and inhibit
valve operation.
14. Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows. Tighten the control valve body bolts (in
sequence) to 11 Nm (97 lb in).