K 2500 Yukon 4WD V8-6.0L VIN U (2000)
3. Insert a flat-bladed tool between the trim panel and the door in order to carefully pry the panel from the door.
INSTALLATION PROCEDURE
1. Install the trim panel to the door by pushing on the panel edges until the panel is in place.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the trim panel armrest retaining screws.
Tighten
Tighten the trim panel armrest screws to 2 N.m (18 lb in).
3. Install the door handle bezel.
Trim Panel Replacement - Side Rear Door
