K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Headliner: Service and Repair
Headlining Trim Panel Replacement (Utility)
Removal Procedure
1. Remove the IP top trim panel.
2. Remove the windshield pillar moldings.
3. Remove the drivers side accessory housing (1) from the IP.
4. Remove the IP upper brackets.
5. Remove the transfer case control module, if equipped.
6. Release the pressure on the headliner wire harness by removing the wire harness retainer (1) from the IP support beam.
7. Disconnect the headliner wire connectors from the junction block located next to the brake pedal.
