K 2500 Yukon 4WD V8-6.0L VIN U (2000)
6. Remove the jack from vehicle.
Installation Procedure
1. Install the tool kit.
2. Turn the wing nut clockwise.
3. Tilt down the back drivers side rear seat bottom.
4. Install the jack to vehicle
5. Turn the adjusting knob clockwise.
6. Close the door in left rear of vehicle below speaker grille.
Rear Quarter Trim Panel Replacement (Utility Left)
Rear Quarter Trim Panel Replacement (Utility Left)
Removal Procedure
1. Remove the rear seat.
2. Remove the Third-Pillar trim panel.
3. Remove the garnish molding.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
Installation Procedure