K 2500 Yukon 4WD V8-6.0L VIN U (2000)
5. Remove the master cylinder mounting nuts.
6. Remove the master cylinder.
7. Remove the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement.
Installation Procedure
1. Install the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement.
2. Bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding.
3. Install the master cylinder
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the master cylinder mounting nuts.
^
Tighten the nuts to 36 N.m (27 lb ft).
5. Remove the pipe caps.
