gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Park Brake Release Handle Replacement|Page 10100 > < Park Brake Release Handle Replacement|Page 10098

K 2500 Yukon 4WD V8-6.0L VIN U (2000)

Page 2
background image

10. Remove the park brake lever mounting nuts.
11. Disconnect the front park brake cable from the park brake lever.
12. Remove the park brake lever.

Installation Procedure

1. Connect the front park brake cable to the park brake lever.
2. Install the park brake lever.
3. Install the MID-Bussed Electrical Center bracket. Refer to Fuse Block Replacement.

Notice:  Refer to Fastener Notice in Service Precautions.

4. Install the park brake lever mounting nuts.

^

Tighten the nuts to 25 N.m (18 lb ft).

5. Raise the vehicle.

Park Brake Release Handle Replacement|Page 10100 > < Park Brake Release Handle Replacement|Page 10098