K 2500 Yukon 4WD V8-6.0L VIN U (2000)
![background image](/gmc/k_2500_yukon_4wd/v8-6.0l_vin_u/Page-1763004.png)
5. Install the fuel rail assembly.
6. Tighter the fuel filler cap.
7. Connect the negative battery cable.
8. Inspect for leaks.
8.1. Turn the ignition ON for 2 seconds.
8.2. Turn the ignition OFF for 10 seconds.
8.3. Turn the ignition ON.
8.4. Inspect for fuel leaks.
NOTE: Refer to Fastener Notice in Cautions and Notices.
9. Install the engine sight shield.
Tighten
Tighten the engine sight shield bolts to 10 N.m (89 lb in)