K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement (Single Tank)
REMOVAL PROCEDURE
CAUTION: Refer to the Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure (Pickup) or Fuel Tank Draining Procedure (Utility with Single Tank) or Fuel
Tank Draining Procedure (Utility with Dual Tanks -Front Tank) or Fuel Tank Draining Procedure(Utility with Dual Tanks - Rear Tank).
4. Remove the fuel tank.
5. Remove the fuel pressure sensor (1).
INSTALLATION PROCEDURE