K 2500 Yukon 4WD V8-6.0L VIN U (2000)
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the window.
4. Remove the screws.
5. Pull the weatherstrip from the following locations:
-
The front of the glass run channel
-
The top of the window frame flange
-
The rear of the glass run channel
6. Remove the weatherstrip from the door.
INSTALLATION PROCEDURE
1. Install the weatherstrip to the following locations:
-
The front of the glass run channel
-
The top of the window frame flange
-
The rear of the glass run channel
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts.
Tighten
Tighten to 6 N.m (53 lb in).