K 3500 Truck 4WD V8-379 6.2L DSL (1985)
6. To install, reverse Steps 1-7 above.
-
Torque all hydraulic lines and attaching bolts to specifications.
-
Lubricate pedal rod and linkage pivot bolts, pins, sleeves and bushings with Delco Brake Lube (or equivalent).
Notice: This fastener is an important attaching part in that it could affect the performance of vital components and the system, and/or could result
in major repair expense. It must be replaced with one of the same part number or with an equivalent part if replacement becomes necessary. Do not
use replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to assure proper retention of
this part.
7. Fill and bleed system.
8. Check brake pedal and stoplamp switch adjustment.
