gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Exhaust System > < Water Pump Pulley - Cracked
Page 1
background image

Drive Pulley: All Technical Service Bulletins
Water Pump Pulley - Cracked

NUMBER:

86-B-51

GROUP:

6A - Diesel Engine

DATE:

March, 1986

SUBJECT:

WATER PUMP PULLEY (KIT PART NUMBER 15550089)

MODELS:

1985 C, K, - 1, 2, 3, WITH 6.2L DIESEL ENGINE AND AIR CONDITIONING

Some water pump pulleys on the above listed 1985 vehicles, equipped with 6.2L diesel engines and air conditioning may experience a crack in the area
where the pulley is bolted to the water pump flange. To correct this condition, a new water pump pulley, P/N 15550089, is available. The new pulley
contains a reinforcing cup located on the outside of the pulley hub.
Because it is thicker than the pulley it replaced, this new pulley requires longer mounting studs. Four new studs are included with the pulley, and it is
MANDATORY that all four studs are installed with the new pulley to assure proper clamp load. This new pulley can be used on either C or J engines
and is currently available through WDDGM.

Exhaust System > < Water Pump Pulley - Cracked