gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Door Locks - Binding or Sticking/Key Hard to Insert|Page 8679 > < Door Locks - Binding or Sticking/Key Hard to Insert|Page 8677

K 3500 Truck 4WD V8-393 6.5L DSL Turbo (1993)

Page 17
background image

9. Use template # 1 to mark two drill and one self tapping screw locations with center punch tool.

10. Drill two 9 mm holes in the two locations closest to the door hinge. Do not drill third location.
11. Bolt the door trim strap anchor bracket to the kick panel area using two bolts, two washers and two nuts (bolt-washer-bracket-sheet metal-nut

assembly).

12. Install the self tapping screw to the third hole of the anchor bracket. The door trim strap kit should be installed at this point.

Door Locks - Binding or Sticking/Key Hard to Insert|Page 8679 > < Door Locks - Binding or Sticking/Key Hard to Insert|Page 8677