K 3500 Truck 4WD V8-454 7.4L VIN J SFI (1996)
![background image](/gmc/k_3500_truck_4wd/v8-454_7.4l_vin_j_sfi/Page-1883002.png)
5. Remove the hub/rotor retaining bolts.
6. Using a wheel puller, remove the rotor assembly.
7. Inspect all of the parts. Replace the parts as necessary.
INSTALLATION PROCEDURE
Hub, Knuckle, And Control Arm Components
1. Install the hub/rotor to the hub and bearing assembly.
2. Install the rotor and hub assembly to the axle.
^
Tighten the bolts to 180 Nm (133 ft. lbs.).
^
Tighten the nut to 225-235 Nm (165-173 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.