K 3500 Truck 4WD V8-5.7L VIN R (1998)
11. Disconnect the exhaust gas recirculation (EGR) pipe from the bracket and the front of the intake manifold.
12. Remove the PCV valve.
13. Disconnect the fuel pipes from the rear of the intake manifold.
14. Disconnect the electrical connector from the power steering pump.
15. Remove the power steering pump mounting bracket using the following procedure:
-
Remove the power steering pump pulley.
-
Remove the nut, then the bolts.
-
Remove two nuts from the back of the power steering pump.
-
Slide the power steering pump mounting bracket forward, with the power steering pump still attached.
16. Disconnect the wiring bracket from the rear of the right cylinder head.
17. Remove one valve rocker arm cover.
18. Remove the intake manifold bolts.
19. Remove the intake manifold. Refer to Intake Manifold Removal under Engine Unit Repair.
20. Clean all surfaces. Refer to Intake Manifold Clean and Inspect under Engine Unit Repair.
