K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Parking Brake Cable: Adjustments
^
Tools Required
-
J 35999 Tension Scale
1. Remove the clevis pin (3) from the lever (2).
2. Set the parking brake by pushing the pedal down 18 degrees.
^
Insert a 3 mm (0.125 inch) pin into locating hole (1) in the pedal assembly
^
Push the pedal down until the pin contacts the parking brake outer flange.
3. Install J 35999 with a small length of cable or chain, and a tightening device (like a turnbuckle) on the frame.
4. Install a small chain (5) on the lever (1) near the spring on the bottom of the lever.
^
Tighten the tightening device until J 35999 is at 222 N (50 lb).
