K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Install the pushrod to the brake pedal pin.
5. Install the stoplamp switch.
6. Install the spacer (3), the wiring harness bracket (2), and the master cylinder (1) to the booster assembly (4).
7. Install the master cylinder nuts.
^
Tighten the nuts to 30 Nm (20 ft. lbs.).
8. Connect the return hose, steering gear, and inlet hoses.
9. Connect the negative battery cable.
10. Bleed the hydraulic booster system.