K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
-
Tighten the bolts to 1.5 N.m (13 lb in).
-
Tighten the nuts to 10 N.m (89 lb in).
8. Install the drain valve (3).
9. Connect the electrical connectors, as necessary.
10. Install the right rear wheelhouse.
11. Install the right rear quarter trim panel.
12. Add the engine coolant. Refer to Draining and Filling Cooling System
13. Inspect the system for leaks.
If the fluid charging system is not used, the system must be burped to release air bubbles.