K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
6. Remove the engine mount assembly.
7. Remove the engine mount through bolt and the nut.
8. Raise the engine only enough to permit removal of the engine mount.
9. If servicing a 4 wheel drive vehicle, remove the engine mount assembly bolts, nuts, and washers.
10. Remove the engine mount assembly.
INSTALLATION PROCEDURE
1. If servicing a 2 wheel drive vehicle, install the engine mount assembly.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount assembly bolts, nuts, and washers.
^
Tighten the bolts to 59 Nm (44 ft. lbs.).
^
Tighten the nuts to 45 Nm (33 ft. lbs.).