K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
1. Install the exhaust manifold to the cylinder head.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust manifold bolts.
^
Tighten the bolts and stud/nuts to 35 Nm (26 ft. lbs.).
3. Install the heat shield to the exhaust manifold.
^
Tighten the bolts and stud/nuts to 50 Nm (37 ft. lbs.).
4. Install the glow plugs in the cylinder head. Refer to Glow Plug Replacement - Right Side in Powertrain Managements.
5. Install the turbocharger to the exhaust manifold. Refer to Turbocharger Replacement.
6. Install the air cleaner assembly to the vehicle. Refer to Air Cleaner Assembly Replacement in Powertrain Managements.
7. Install the right front inner wheel housing to the vehicle.
8. Install the right front wheel to the vehicle.
9. Lower the vehicle.
10. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Powertrain Management.
