K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Coolant Level Indicator Module: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the battery negative cable.
2. Remove the IP cluster to access the connector. Refer to Compartment Replacement - IP in Instrument Panel, Gauges and Warning Indicators.
3. Remove the module (3) by detaching the mounting pin from the mounting hole.
4. Remove the module from the harness connector.
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the retainer is installed correctly on the coolant module.
1. Install the coolant module (3) to the harness connector.
2. Attach the pin to the mounting hole in order to install the module.
3. Install the IP cluster to the IP. Refer to Compartment Replacement - IP in Instrument Panel, Gauges and Warning Indicators.
4. Install the battery negative cable.
