K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
5. Install the coil assembly retaining ring. Ensure that the ring (1) is firmly seated in the groove on the upper shaft assembly (2).
6. Pop the wire harness assembly (4) into the wire strap (5).
7. Install the wire harness strap (2) into the upper tilt head assembly (1).
8. Install 3 wire harness straps (3) from the wire harness assembly.
9. Install the multi-function switch lever assembly and the bolt.
10. Install the upper and lower shrouds.
11. Install the tilt lever, if equipped.
12. Install the steering wheel assembly.
13. Enable the SIR system.