K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
7. Install the J 25025-5 into the valve body.
8. Install the case gasket (3) and the valve body gasket (1) to the spacer plate (2). The case gasket is identified by a C. The valve body gasket is
identified by a V.
9. Use the J 36850 in order to retain the gaskets (3) to the spacer plate (2).
10. Install the spacer plate and the gaskets to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the oil pass cover and the oil pass cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
12. Install the 1-2 accumulator piston oil ring seal (1) onto the 1-2 accumulator piston (2).