K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
2. Install the shift lever.
3. Install the TORX head screw to the shift lever.
^
Tighten the screw to 22 Nm (16 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Roll the seal up the lever until the TORX head screw is covered.
5. Install the TORX head screws to the lower column cover.
^
Tighten the screws to 6 Nm (53 inch lbs.).