K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Transfer Case Actuator: Service and Repair
Transfer Case - NVG 243-NP1 (Two Speed Selectable)
Removal Procedure
1. Remove the transfer case shield.
2. Remove the transfer case wiring harness connectors from the motor/encoder.
3. Remove the four bolts that secure the motor/encoder to the transfer case.
Installation Procedure
1. Install the with a motor/encoder.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four bolts securing the motor/encoder to the transfer case.
^
Tighten the motor/encoder bolts to 25 Nm (18 ft. lbs.).