K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Rear Door Latch: Service and Repair
Door Latch Replacement (Lower)
Door Latch Replacement (Lower)
Removal Procedure
1. Note the alignment of the door latch by completing the appropriate step:
*
Use the striker as an alignment guide.
*
If the striker has been removed, mark the location of the door latch.
2. Remove the latch assembly bolts.
Installation Procedure
1. Install the latch assembly bolts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Adjust the latch assembly alignment.
Tighten the bolts to 24 N.m (18 lb ft).
