K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Rear Door Trim Panel Replacement (Endgate)
Removal Procedure
1. Lower the endgate.
2. Remove the screws that retain the trim panel to the endgate.
3. Remove the trim panel from the endgate.
Installation Procedure
1. Install the trim panel to the endgate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the trim panel to the endgate screws.
Tighten the trim panel to the endgate screws to 2 N.m (18 lb in).