K Yukon/Denali 4WD V8-5.7L VIN R (2000)
2. Install the fender to the side panel with the screws (1,2).
Tighten the fender to the side panel screws to 18 N.m (13 lb ft).
3. Install the brace to the support bolts.
Tighten the brace to the support bolts to 18 N.m (13 lb ft).
4. Install the fender to the front panel screws.
Tighten the fender to the front panel screws to 18 N.m (13 lb ft).
5. Install the fender to the brace bolts.
Tighten the stepside fender to the brace bolts to 18 N.m (13 lb ft).
6. Install the side panel screws at the taillamp pocket.
Tighten the side panel screws to 18 N.m (13 lb ft).
7. Install the fender to the support screws.
Tighten the fender to the support screws to 18 N.m (13 lb ft).
8. Install the brace to the support screws (1).
Tighten all the other screws to 18 N.m (13 lb ft).
