K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Trim Panel: Service and Repair
Body Hinge Pillar Trim Panel Replacement
Body Hinge Pillar Trim Panel Replacement
Removal Procedure
1. Remove the retainer screw.
2. Remove the trim panel from the retainers.
Installation Procedure
1. Install the trim panel to the retainers.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer screw.
Tighten the screw to 6 N.m (53 lb in).
Center Pillar Garnish Molding Replacement (Crew Cab)
Center Pillar Garnish Molding Replacement (Crew Cab)
Removal Procedure
1. Remove the door sill plates.
2. Remove the seat belt height adjusters, the side door lock pillars only.
