K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Power Door Lock Actuator: Removal and Replacement
Door Lock Actuator Replacement
Removal Procedure
Tools Required
J 34940 Rivet Gun
1. Remove the trim panel, as necessary.
2. Remove the water deflector, as necessary.
3. Remove the access hole cover, as necessary.
4. Remove the actuator lock control rod (1).
5. Disconnect the actuator wiring connector.
6. Drill out the rivets using an 3 mm (.125 in ) drill bit.
7. Remove the actuator from the door.
Installation Procedure
1. Using the J 34940 with rivets, install the actuator to the door.
2. Install the actuator lock control rod (1).
3. Connect the actuator wiring connector.