K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
Master Cylinder Replacement (Hydraulic Booster)
Removal Procedure
1. Apply the park brake.
2. Disconnect the brake pipes.
3. Plug the pipes in order to prevent brake fluid loss or contamination.
4. Remove the master cylinder nuts.
5. Remove the bracket (1) and the master cylinder (2).
Installation Procedure
Before you install the master cylinder, bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding.
1. Install the master cylinder (2) and bracket (1).