K Yukon/Denali 4WD V8-5.7L VIN R (2000)
The SET/COAST switch controls the following 3 functions:
^
The SET function
^
The COAST (Trim) function
^
The TAP DOWN function
The TAP DOWN Function
Use the TAP DOWN function in order to incrementally decrease the cruise speed. For TAP DOWN to operate, the cruise control must be engaged. To
decrease the vehicle speed by increments of 1.6 km/h (1 mph) proceed as follows:
1. Quickly depress and release the SET/COAST button. Vehicle speed will decrease by 1.6 km/h.
2. Continue to quickly depress and release the SET/COAST button until the vehicle is travelling at the desired speed.
Do not hold the button in the depressed position, or the system will revert to the COAST mode. The system can TAP DOWN to 40 km/h (25 mph). This
is the lowest speed at which the cruise control system will engage. The system was not designed to operate at speeds lower than 40 km/h (25 mph)
The accelerator can be depressed at any time to override the cruise system. Releasing the accelerator will return the vehicle to the previously set cruise
speed.
The TAP UP Function
Use the TAP UP function in order to incrementally increase the cruise speed. For TAP UP to operate, the cruise control must be engaged. In order to
increase the vehicle speed by increments of 1.6 km/h (1 mph) proceed as follows:
1. Quickly press the slide switch toward the RESUME/ACCEL position, then release the switch. Vehicle speed will increase by 1.6 km/h.
2. Continue to quickly depress and release the RESUME/ACCEL switch until the vehicle is travelling at the desired speed.
Do not hold the switch in the RESUME/ACCEL position, or the system will revert to the ACCEL mode. The cruise control system cannot TAP UP
beyond 201 km/h (125 mph).
