K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Oil Filter Adapter: Service and Repair
Oil Filter Bypass Valve Replacement
Removal Procedure
1. Remove the oil filter. Refer to Engine Oil and Oil Filter Replacement.
2. Remove the bolts.
3. Remove the oil filter bypass valve.
Installation Procedure
1. Install the oil filter bypass valve and a new gasket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts finger tight.
-
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the engine oil and the oil filter. Refer to Engine Oil and Oil Filter Replacement.