K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Clockspring Assembly / Spiral Cable: Service and Repair
SIR Coil Assembly
REMOVAL PROCEDURE
CAUTION: Refer to SIR Handling Caution in Service Precautions.
1. Disable the SIR system. Refer to Disabling the SIR System.
2. Remove the steering wheel assembly.
3. Remove the tilt lever, if equipped.
5. Remove the upper and lower shrouds.
6. Pop the wire harness assembly out of the wire harness strap.
7. Remove the 3 wire harness straps from the wire harness assembly.
8. Remove the wire harness strap (2) from the upper tilt head assembly (1).
9. Remove the coil assembly retaining clip (1).
10. Remove the coil assembly (2).
11. Remove the wave washer (3).
INSTALLATION PROCEDURE
NOTE: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or malfunctioning
of steering column.