K Yukon/Denali 4WD V8-5.7L VIN R (2000)
4. Remove the seat belt and retractor.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the bolt through the seat belt retractor to the weld nut.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
2. Install the quarter trim panel.
3. Install the bolt to the upper anchor plate.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
4. Install the rear seat.
Extended Cab With 3rd Door
REMOVAL PROCEDURE
CAUTION: Refer to Belt Replacement Caution in Service Precautions.
NOTE: Refer to Servicing and Replacing Seat Belt Notice in Service Precautions.
